Villa Architettonica Vista Mare Con Piscina A Sfioro Al Tramonto — Roupes, Creta In Costruzione

Set in the tranquil hillside village of Roupes, in a newly constructed plot with total 3 autonomous and independend villas, just 20 minutes from Rethymno, this exceptional ground floor villa (135 m², under construction) offers a seamless blend of minimalist architecture, privacy, and breathtaking natural surroundings. Set on an 800 m² plot, the residence commands uninterrupted panoramic views of both the sea and mountains, with spectacular sunsets that become part of the daily living experience.

The villa’s architecture is defined by clean lines, earthy tones, and a refined Mediterranean aesthetic. Expansive floor-to-ceiling openings connect the interior with the outdoor living spaces, allowing natural light to flow throughout. The open-plan living area features a sophisticated kitchen, elegant lounge, and a bioethanol fireplace that adds warmth and atmosphere.

The outdoor area is designed as a private retreat, centered around a 27 m² infinity-style swimming pool overlooking the landscape. Sun loungers, landscaped gardens, and a BBQ area create an ideal setting for relaxation and entertaining.

Property Overview:

Detached ground-floor villa, 133 m²
800 m² private plot
3 bedrooms (accommodates up to 8 guests)
4 bathrooms
Infinity-style swimming pool (27 m²)
Electric BBQ area & storage room
Bioethanol fireplace
Air conditioning in all rooms
Panoramic sea & mountain views
Absolute privacy

Modern Comfort & Sustainability:

Provision of Installation for heat pumps (house & pool heating)
Provision of Installation for solar panels
Provision of Installation for electric vehicle charging
Private parking for 2 cars under a pergola.

General Specifications

This specification document briefly describes the full scope of construction works, the materials to be used, and the corresponding technical specifications for the construction of the buildings. All materials will come from recognized and certified companies.

Excavations
Excavations will be carried out using mechanical means to the depth specified by the structural study. Subsequently:

The ground will be cleaned, leveled, and a blinding concrete layer of approximately 10 cm thickness will be placed.
Excavation products will be used for backfilling within and around the foundation, provided they are suitable.
Any excess material will be removed in accordance with regulations for CDW (Construction and Demolition Waste).

In case of water presence:

It will be removed using pumps, and the ground will be reinforced with gravel before placing the blinding concrete.

If deeper excavation is required:

The foundation height will be adjusted accordingly.

Reinforced Concrete

The load-bearing structure will be constructed of reinforced concrete C25/30 with B500c steel, in accordance with the current concrete and seismic regulations.
The blinding concrete will be C12/15, approximately 10 cm thick.

Masonry
External walls:

Made of 30 cm perforated clay bricks with an external thermal insulation system applied according to the studies.

Internal walls:

Made of 9 cm and 20 cm clay bricks, depending on the case.

Reinforcements:

A horizontal beam (bond beam) will be installed at approximately 2.20 m height.

Plumbing Installations

Each building/residence will have an individual water supply with meter and piping.
Pipes will be single-piece without joints within the floor.
A manifold (collector) will be installed for water supply control.
Solar water heater (1 per residence).

Drainage:

Made of heavy-duty plastic pipes, embedded in walls or floors.
With inspection chambers.
Wastewater will be connected to the local sewer system.

All plumbing installations will comply with applicable regulations.

Electrical Installations

Residences will be supplied by an independent grid meter with three-phase power.

Electrical panels:

Plastic, with all necessary components: switches, relays, control units.
Lighting fixtures and sockets will be supplied via independent circuits.

Telephone & Internet networks:

Installation with UTP cable, from the central telecom box to individual distributors.

Indicative equipment per space:

Bedrooms:

Ceiling lighting controlled from 3 points (A/R) and concealed lighting
5 sockets
Telephone and TV outlets
Air conditioning

Living – Dining room:

Ceiling lighting controlled from 2 points (A/R) and concealed lighting
4 sockets
TV outlets
Air conditioning

Kitchen:

Ceiling lighting
3 countertop sockets
Connections for oven, washing machine, refrigerator, etc.
Under-cabinet concealed lighting

Bathrooms:

Spotlights
1 socket

Outdoor areas:

Ceiling spotlights & waterproof sockets on balconies

Also provided:

Alarm system installation (wiring & provisions only, without equipment)
All sockets will be Schuko type
All installations will comply with current regulations
Intercom system in each residence

Plastering

Wall plastering will be applied in three layers:
Rough coat (cement and sand reinforced)
Base coat (20–25 mm)
Finish coat (marble dust plaster)
All surfaces will be perfectly horizontal and vertical.
Anti-crack fiberglass mesh will be used at joints of different materials.
Galvanized corner beads will be placed on exposed corners.
Ceilings will not be plastered due to gypsum board installation.

Gypsum Boards

Moisture-resistant gypsum boards will be installed on bathroom ceilings.
Standard gypsum boards will be installed on ceilings of open-plan areas.

Paintworks
Interior:

Walls and ceilings will be puttied and painted with plastic paint as follows:
Surface cleaning and priming
Filling (general & local), sanding and smoothing
Three coats of paint

Exterior:

A 7 cm external thermal insulation system will be applied, finished with 1.5 mm acrylic colored plaster in earthy tones as per renderings.

Flooring

All internal and external floors (rooms, kitchens, bathrooms, balconies) will be covered with first-quality tiles, 60×120 cm.
The same material will be used for skirting.
Tile joints will be filled with grout to prevent wear.
Proper drainage slopes will be ensured for outdoor floors.

Marble Works

Window sills will be covered with Bracia (beige) or Kavala (white) marble.

Bathroom Cladding

Bathroom walls will be clad with first-quality tiles (60×120 cm) up to gypsum board height.
The substrate will be clean, smooth, and ready for bonding.
Cement mortar and tile adhesive will be applied on floors.

External Frames

All external frames will be aluminum with thermal break (as per energy regulations).
Glazing will be double, sound-insulating, and energy-efficient.
Frames will be anthracite color.
Bathrooms will have frosted glass.

Wardrobes – Kitchens
Kitchen:

Cabinets made of melamine
Natural oak shade or equivalent
Soft-close mechanisms on doors and drawers
Countertop made of engineered granite
Integrated LED lighting under wall cabinets

Bedroom wardrobes:

Made of melamine in natural oak shade
Full height up to ceiling
Internal layout with shelves and hanging rails
Soft-close mechanisms

Heating – Cooling

Air conditioning units will be used for heating and cooling.
Hydraulic and electrical pre-installation for heat pump and radiators will be provided.

Interior Doors – Entrance Door
Interior doors:

Laminate, in natural oak shade or equivalent
Include handle and lock

Entrance doors:

Reinforced security doors with handle and lock

Insulation – Waterproofing

All bathrooms will be waterproofed.
Roofs will be thermally and waterproof insulated according to regulations.
All external walls and concrete structure will be insulated with external thermal insulation.

Sanitary Ware – Accessories
Installation includes:

Shower with cabin, linear drain, and mixer tap
Wall-hung toilet with concealed cistern and soft-close seat
Bathroom furniture with sink, mirror, and mixer tap
Accessories (towel rail, toilet paper holder, hook)
Sanitary ware: white

Swimming Pool

Waterproofing installation
Tile installation
Installation of operating equipment

Miscellaneous Construction Works

Construction of perimeter walls with stone
Pergola in the parking area
Electric BBQ

Prime Location:

8 km from beaches, supermarkets, pharmacies & bakeries
500 m from a traditional village taverna
20 minutes from Rethymno
1 hour from the airport
10 minutes from Arkadi Monastery
20 minutes from Amari Dam
5 minutes from Eleftherias Museum

Lifestyle Statement:
This villa is more than a residence—it is a contemporary Mediterranean sanctuary designed for those who value architecture, privacy, and uninterrupted views in an authentic Cretan setting.

(Two villas are available) Delivery Date June 2027