The design and execution of the entire watch bears witnessto a complete conceptual approach regarding the movement, case and dial. As a result,everything has been constructed according to an extremely rigorous specification, in the manner of the analytical engineering methods used in the design of Formula 1racing cars where the chassis and the engine are developed in complete harmony. For example, a casing ring is no longer used and the movement is mounted on chassis mounting rubbers (ISOSW) fixed by 4 titanium screws. Features such as these are evidence of uncompromising workmanship. The case of the RM 029 requires 47 swaging operations including 21 striking, 255 milling operations. The machining lasts 4 hours. Concerning the finishing work, 1 full day is required.
The tripartite case is water resistant to 50 meters, ensured by three Nitril O-ring seals. The case is assembled with 12 spline screws in grade 5 titanium and abrasion resistant washers in 316L stainless steel.
Also known as: Richard Mille RM-029, RM029, RM 029, RM29, RM 29, RM-29
Motion in Time is not affiliated with Richard Mille & is not an official Richard Mille Dealer.
Motion in Time, Inc. is not affiliated with Richard Mille, or any other watch company, and is not an official Richard Mille Jeweler. Richard Mille warranty no longer attaches. Motion in Time, Inc. is the sole warrantor of these watches. Motion in Time, Inc. is not affiliated with any watchmaker. All watches and watch items sold are preowned.